L.D. World Gadgets

Aceco FC1001 Handheld Radio Frequency Scanner Counter

Introduction

The Aceco FC1001 hand-held frequency counter is a superb value low cost instrument. It is compact, truly pocket sized, test instrument designed for ease of use and dependable performance. Comes complete, ready to use with internal NiCd pack, AC wall charger and 7 section telescopic antenna.

• A superb value low cost frequency counter
• Frequency range: 10 MHz - 3 GHz
• Weight: 210g
• Case: 80 mm * 68 mm * 31 mm stamped aluminum with black anodized finish
• Battery: Internal 4 * AA 600 mAH NiCd pack
• 8 digit liquid Crystal Display with 100 Hz resolution
• Low power consumption (Average 6 hour battery life)
• Hold switch to lock display

Specifications:

Features:

• 8 digit Liquid Crystal Display
• Low power consumption (Average 6 hour battery life)
• Supplied with NiCd pack, AC wall charger and telescopic antenna
• Hold switch to lock display
• High speed counter with 100 Hz resolution

Controls:

1. Power Switch - This slide switch turns the counter on and initiates a 2 second test of all the LCD segments.
2. Hold Button - This holds the current display and stops the counter from counting.
3. Calibration - The calibration adjustment opening is located on the front panel of the counter. This allows access to the trimmer capacitor that provides about a 10 PPM adjustment range of the time base oscillator.This is not usually necessary but to do so read a signal of an known frequency before adjusting the trimmer for correct frequency display. If you calibrate at 4.1943 MHz or above then the counter will be more accurate.

Reception Distance From Transmitter:

The distance from which you will be able to receive frequencies will depend upon the type and location of the transmitting antenna, transmitter output power and the frequency in use.
Some typical distances are:

Input Sensitivity:

For more details:

Sales@Ldgadgets.com